View E301J50AB22_3019067.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker c&k e series sealed miniature rocker and lever handle switches models available features/benefits ? sealed against solder and cleaning process contaminants ? esd resistancell actuator options ? rocker, case & bushing ul 94v-0 ? rous compliant typical applications ? t elecommunications ? instrumentation ? computers & peripherals specifications contact rating: b contact material: 0.4 va max. @ 20 v ac or dc max. q contact material (e1xx & e2xx models): 7.5 amps@125 v ac or 28 v dc; 3 amps @ 250 v ac. (e3xx models): 5 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac. see page h-37 for additional ratings. electrical life: e1xx and e2xx models: 40,000 make-and-br eak cycles at full load. e3xx models: 30,000 cycles. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. electrostatic discharge (esd) option: all actuator options: 15,000 v dc max. @ sea level, actuator to terminals. dielectric strength: 1000 v rms min. @ sea level. opera ting tempera ture: C0?oto 85?. solderability: per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). materials case & bushing: glass filled nylon 6/6, flame retardant, heat stabilized (ul 94v-0). actuator: nylon, black standard, internal o-ring seal standard with all actuators. frame: spring steel, black standard. switch suppor t: brass or steel, matte-tin plated. actuator pivot & mounting bracket: nylon. actuator pivot retainer: stainless steel. contacts & terminals: b contact material: copper alloy, with gold plate over nickel plate. q contact material: copper alloy , silver plated. see page h-37 for additional contact materials. terminal seal: epoxy . hardware: nut, screw & lockwasher: stainless steel. standof f: nylon standard, aluminum available, consult customer service center. note: any models supplied with q, b, g, s p & r contact material ar e rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. note: specifications and materials listed above are for switches with standard options. for information on specific and custom switches, consult customer service center . build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages h-26 through h-39. for additional options not shown in catalog, consult customer service center. all models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. switch function e101 sp on-none-on e103 sp on-off-on e105 sp mom.-off-mom. e107 sp on-off-mom. e108 sp on-none-mom. e201 dp on-none-on e203 dp on-off-on e205 dp mom.-off-mom. e207 dp on-off-mom. e208 dp on-none-mom. e21 1 dp on-on-on e213 dp on-on-mom. e215 dp mom.-on-mom. e301 3p on-none-on actuator j1 .531 long rocker j2 lever j3 .906" long rocker j1 1 rocker with frame j21 lever with frame j50 .362" long rocker j60 lever j90 lever terminations a right angle, pc thru-hole av2 vertical right angle, pc thru-hole c pc thru-hole z solder lug a3 right angle, snap-in, pc thru-hole av3 vertical right angle, snap-in, pc thru-hole v3 .460" high, v-bracket v4 .630" high, v-bracket v5 vertical right angle, pc thru-hole v6 .460" high, v -bracket v7 .630" high, v-bracket v8 .953" high, v-bracket v21 .555" high, v -bracket, snap-in v31 .460" high, v-bracket, snap-in contact material b gold k gold, tin-lead p gold, matte tin q silver m silver, tin-lead s silver, matte-tin g gold over silver l gold over silver , tin-lead r gold over silver, matte-tin seal e epoxy actuator color 2 black 3 red frame color 2 black none no frame color required metal frame color (j11, j21 actuators) 2 black hC6
hC7 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com dpdt 2-1,5-4 n/a open n/a 2-3,5-4 2-3,5-6 on none on on off on mom. off mom. on off mom. on none mom. on on on on on mom. mom. on mom. e201 e203 e205 e207 e208 e211 ** e213 ** e215 ** dp spdt 2-1 n/a open n/a 2-3 on none on on off on mom. off mom. on off mom. on none mom. e101 e103 e105 e107 e108 sp schematic connected terminals pos. 1 pos. 2 pos. 3 switch function pos. 1 pos. 2 pos. 3 model no. no. poles c&k e series sealed miniature rocker and lever handle switches switch function dpdt spdt part number shown: e101j1zbe2 part number shown: e201j1zbe2 ** wiring for 3-way switch, har dwar e available seperately , see t echnical data section of this catalog. mom. = momentary all models with all options when ordered with g, l, m or q contact material. terminal nos. for reference only terminal nos. for refer ence only c&k marking on opposite side c&k marking on opposite side h rocker
c&k e series sealed miniature rocker and lever handle switches switch function actua t orC anel rear mount p ane l mo unt i ng j1 & j2 a c tu a to r s 3pdt 2-1,5-4,8-7 n/a 2-3,5-6,8-9 on none on e301 3p schematic connected terminals pos. 1 pos. 2 pos. 3 switch function pos. 1 pos. 2 pos. 3 model no. no. poles 3pdt c&k marking on opposite side c&k marking on opposite side part number shown: e301j1zbe2 all models with all options when ordered with g, l, m or q contact material. mom. = momentary ** wiring for 3-way switch, see t echnical data section of this catalog. terminal nos. for reference only finish: matte. other colors, custom actuator mark - ings and legends available, consult customer service center. note: hardware: two eachounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. internal o-ring actuator seal standar d. actuators available separately , see page h-37. hardware available seperately, see technical data section of this catalog. j1, j2 actua- tors available with c, z or z3 terminations. 2 black 3 red actuator color option code j1 lever j2 lever actuator color actuator dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker hC8
hC9 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com c&k e series sealed miniature rocker and lever handle switches actuatorCear mount panel mounting actuator finish: matte, frame finish: gloss. other colors, custom actuator markings and legends available, consult customer service center . note: internal o-ring actuator seal standard. actuators & frames available separately, see page h-37. hardware available seperately, see t echnical data section of this catalog. n. j11 & j21 actuators available with c, z & z3 ter- minations. 2 black frame color option code actuatorCc mount finish: matte. other colors, custom actuator markings and legends available, consult customer service center. note: hardware: two eachounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel ar e supplied standar d on switches with panel mounting bracket. inter nal o-ring actuator seal standard. actuators available separately, see page h-37. hardware available seperately, see technical data sec- tion of this catalog. j1, j2 actuators available with a, a3, a v2, a v3, v2-v61 terminations. actuator color actuator frame color actua tor actuator color j1 1 rocker with frame j21 lever with frame j1 rocker j2 lever note: this option has r educed anti-static capability . note: this option has r educed anti-static capability. h rocker 2 black 3 red actuator color option code 2 black 3 red actua t or color option code
c&k e series sealed miniature rocker and lever handle switches actuatorCc mount pc mo unting finish: matte. other colors, custom actuator markings and legends available, consult customer service center. note: hardware: two eachounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. internal o-ring actuator seal standard. actuators available separately, see page h-37. hardware available seperately, see technical data section of this catalog. j3 actuators available with av2, av3 & v2-v61 terminations. some permissible actua - tor/termination combinations may lack clearance between actuator and pc board, and care must be exer cised to accommodate this condition. j50, j60 & j90 actuators available with a, a v2, a v3, v2 Cv61 terminations. terminations z solder lug c pc thru-hole spdt thru 3pdt spdt thru 3pdt not available with k, l, p, s, & r or m contact materials. available actuators, see page h-37. actuator color actua tor j3 rocker j50 rocker j60 lever j90 lever dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker hC0 2 black 3 red actuator color option code
hC1 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com c&k e series sealed miniature rocker and lever handle switches terminations pc mounting pc mounting actuator shown in pos. 1 section a-a act u at or s h own in p os . 1 sec t ion a-a a3 right angle, snap-in, pc thru-hole a right angle, pc thru-hole a3 right angle, snap-in, pc thru-hole a right angle, pc thru-hole spdt thru 3pdt z3 quick connect note: not available with j3 actuator. available actuators, see pages h-28 and h-30. t erminal bend radii and lead-in manufacturing option. note: not available with j3, j50, j60 and j90 actuators. a vailable actuators, see pages h-28 thru h-30. t erminal bend radii and lead-in manufacturing option. not available with k, l, p, s, & r or m contact materials. available actuators, see pages h-28 thru h-30. mating quick connector available; order part number 530100000, page h-38. note: pc mounting pattern must clear switch support leg. e101j1abe2 horizontal actuation spdt e201j1abe2 horizontal actuation dpdt h rocker
c&k e series sealed miniature rocker and lever handle switches terminations actuator shown in pos. 1 section a-a pc mo unting actuator shown in pos. 1 section a-a pc mounting av3 vertical right angle, snap-in, pc thru-hole, .150" pitch a v2 ver tical right angle, pc thru-hole, .150" pitch a right angle, pc thru-hole note: terminal bend radii and lead-in manufacturing option. available actuators, see pages h-28 and h-30. note: t erminal bend radii and lead-in manufacturing option. available actuators, see pages h-28 and h-30. e301j1abe2 horizontal actuation 3pdt e101j1av2be2 vertical actuation spdt dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker hC2
hC3 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com c&k e series sealed miniature rocker and lever handle switches terminations section a-a actuator shown in pos. 1 actuator shown in pos. 1 section a-a pc mo unting pc mounting av3 vertical right angle, snap-in, pc thru-hole, .150" pitch av2 vertical right angle, pc thru-hole, .150" pitch av3 vertical right angle, snap-in, pc thru-hole, .150" pitch av2 vertical right angle, pc thru-hole, .150" pitch note: t erminal bend radii and lead-in manufacturing option. available actuators, see pages h-28 and h-30. note: terminal bend radii and lead-in manufacturing option. a vailable actuators, see pages h-28 and h-30. e301j1a v2be2 vertical actuation 3pdt e201j1av2be2 vertical actuation dpdt h rocker
c&k e series sealed miniature rocker and lever handle switches terminations section a-a actuator shown in pos. 1 pc mo unting actuator shown in pos. 1 section a-a pc mounting v5 ver tical right angle, pc thru-hole, .150" pitch note: terminal bend radii and lead-in manufacturing option. a vailable actuators, see pages h-28 and h-30. note: terminal bend radii and lead-in manufacturing option. available actuators, see pages h-28 and h-30. v5 vertical right angle, pc thru-hole, .150" pitch e101j1v5be2 v ertical actuation spdt e201j1v5be2 vertical actuation dpdt dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker hC4
hC5 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com c&k e series sealed miniature rocker and lever handle switches terminations pc mounting pc mounting pc mo unting v21 ver tical mount , v-bracket, snap-in v7, v8 vertical mount, v-bracket v21 ver tical mount , v -bracket , snap-in v6, v7, v8 vertical mount, v-bracket v21 vertical mount, v-bracket, snap-in v6, v7, v8 ver tical mount, v-bracket note: available actuators, see pages h-28 and h-30. note: available actuators, see pages h-28 and h-30. note: available actuators, see pages h-28 and h-30. v21 .555 (14, 10) v6 .460 (11, 68) v7 .630 (16, 00) v8 .953 (24, 21) dim option code v21 .555 (14, 10) v6 .460 (11, 68) v7 .630 (16, 00) v8 .953 (24, 21) dim option code v21 .555 (14, 10) v7 .630 (16, 00) v8 .953 (24, 21) dim option code e101j1__be2 spdt e201j1__be2 dpdt e301j1__be2 3pdt h rocker
c&k e series sealed miniature rocker and lever handle switches terminations pc mo unting pc mounting pc mounting v31 vertical mount, v-bracket, snap-in v3, v4 ver tical mount, v-bracket vertical mount, v-bracket, snap-in v4 vertical mount, v-bracket v31 vertical mount, v-bracket, snap-in v3, v4 vertical mount, v-bracket note: available actuators, see pages h-28 and h-30. note: available actuators, see pages h-28 and h-30. note: available actuators, see pages h-28 and h-30. v3, v31 .460 (11,68) v4 .630 (16,00) dim option code v41 .630 (16,00) dim option code v3, v31 .460 (1 1,68) v4 .630 (16,00) dim option code e101j1__be2 spdt e201j1__be2 dpdt e301j1__be2 3pdt dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker hC6
hC7 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker c&k e series sealed miniature rocker and lever handle switches contact material seal available hardware j2, j21 actuators p art no. 760502263 black 760503000 red material: nylon finish: matte j50 actuator p art no. 775a02263 black 775a03000 red material: nylon finish: matte j60 actuator p art no. 613802263 black 598103000 red material: nylon finish: matte j90 actuator part no. 598002263 black 598003000 red material: nylon finish: matte j3 actuator p art no. 766602263 black 766603000 red material: nylon finish: matte j1, j11 actuators p art no. 776a02263 black 776a03000 red material: nylon finish: matte note: additional nuts, scr ews and lockwashers available separately , see t echnical data section of this catalog. other colors available, consult customer service center. * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. 1 contacts & terminals: copper alloy, with gold plate over nickel plate. 2 end contacts: coin silver, with gold plate over nickel plate. 3 center contacts & all terminals: copper alloy, with gold plate over nickel plate. 4 end contacts: coin silver, silver plated. 5 center contact & all terminals: copper alloy, with gold flash over silver plate. or copper alloy, silver plated. 6 terminals: copper alloy, with tin-lead alloy over nickel plate. 7 terminals: copper alloy , with matte-tin over nickel plate. note: any models supplied with q, b, g, s p & r contact material are rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. all models with all options when ordered with g, l, m, q, s & r contact material. b contact material standard with all terminations. k, l , m, p r & s contact materials not available with z terminations. e epoxy seal option code contact material terminal plating ratings silver 5 tin-lead 6 matte-tin 7 gold 1 silver 4,5 gold over silver 2,3 gold 3 tin-lead 6 matte-tin 7 gold 1 tin-lead 6 matte-tin 7 low level/ dry circuit power low level/dry circuit or power 0.4 va max. @ 20 v ac or dc max. e1xx & e2xx models: 7.5 amps @125 v ac or 28 v dc; 3 amps @ 250 v ac. e3xx models: 5 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac. e1xx and e2xx models: 0.4 va max @20 v ac or dc max. or 7.5 amps @125 v ac or 28 v dc; 3 amps @ 250 v ac. dc e3xx models: 0.4 va max. @ 20 v ac or dc max. or 5 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac. b k p q m s g l r rohs compliant * rohs compatible * yes no yes yes no yes yes no yes yes yesyes yes yesyes yes yesyes
c&k e series sealed miniature rocker and lever handle switches available hardware .495 C.505 (12,57 C12,83) .797 C.803 (20,24 C20,40) .005 r. max. (0,13) typ. .495 C.505 (12,57 C 12,83) .595 C.605 (15,11 C15,37) .005 r. (0,13) max. typ. .495 C.505 (12,57 C 12,83) .620 C.625 (15,75 C15,88) .005 r. (0,13) max. typ. panel mounting for part numbers 4529xxxxx, 4527xxxxx, 4528xxxxx, 4526xxxxx for part numbers 4325xxxxx, 4326xxxxx for part numbers 4327xxxxx, 4328xxxxx typical application fits z3 termination female connector part no. 530100000 available in loose pieces. frame for j11, j21 actuators part no. 764500746 black enamel 764601 106 retaining spring material: spring steel j50, j60 & j90 actuators matte part no. 486702000 material: nylon finish: matte or gloss gloss part no. 486802000 black note: additional nuts, screws and lockwashers available separately, see technical data section of this catalog. other colors available, consult customer service center. frames snap into panel opening and are independent from switch mounting. accurate positioning of the pc mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. available in two basic styles and four panel thicknesses .047-.125 in. material: nylon. finish: matte. j1 & j2 actuators j50, j60 & j90 actuators .125(3,18) p anel thk. p art no. 452602263 black 4526 03000 red .047(1,19) p anel thk. p art no. 452902263 4529 03000 .062(1,57) p anel thk. p art no. 452702263 4527 03000 .090(2,29) p anel thk. p art no. 452802263 4528 03000 .125(3,18) p anel thk. part no. 432802263 black 4328 03000 red .047(1,19) p anel thk. part no. 432502263 4325 03000 .062(1,57) p anel thk. part no. 432602263 4326 03000 .090(2,29) p anel thk. part no. 432702263 4327 03000 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker hC8
hC9 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com available hardware h rocker c&k e series sealed miniature rocker and lever handle switches above frames (part nos. 432xxxxxx) are also available with insert which accepts led for indicator light assembly. order insert separately from frame. blank insert panel (without hole for led) also available. led not included. panel inserts will fit separate snap-in frames for j50, j60, j90 actuators. special colors, custom markings available, consult customer service center. blank p anel insert without hole for led part no. 476602000 black 4766 03000 red p anel insert with hole for led part no. 894902000 8949 03000

▲Up To Search▲

Price & Availability of E301J50AB22

	To Download E301J50AB22 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .